Saturday 3 March 2012

Husaberg FE450 review






Twenty years later, Husaberg is once again making history. Husaberg is adopting an entirely new approach to the enduro concept for its newest generation and has come up with an almost revolutionary engine design with a flat, 70° cylinder angle and electronic fuel injections. In conjunction with an ultra-modern chassis design, it has created an enduro bike that sets a brand-new benchmark for innovative technology and off road handling.

Husaberg FE 450


The suspension is much improved and might even be better than the KTMs with which the Husaberg FE450 shares design and componentry. The front is fairly plush and still has a good stroke. Out back, the shock seems a bit more progressive than a KTM, so you can get away with a softer initial or low speed compression without having a bottoming problem. The brakes are strong and touchy, as with a KTM. But you get used to them, and then you begin to think Japanese bikes have mushy brakes. Its gripper seat is great, especially in muddy condition. Overall, the FE450 isn`t too thin; and the 2.38-gallon gas tank is good for 55 to 65 trail miles or more than an hour and a half or 40 miles at a race pace. More specs and user manual of Husaberg 450 you can see in nextoverview.

Husaberg FE 450


Husaberg FE450 specifications

General information
Model: Husaberg FE 450
Year: 2005
Category: Enduro/offroad

Engine and transmission
Displacement: 449.26ccm
Engine type: Single cylinder
Stroke: 4
Compression: 12.7:1
Bore x stroke: 100x57.2mm
Fuel system: Carburettor. Keihin MXFCR 39 mm
Valves per cylinder: 4
Fuel control: OHC
Ignition: Kokusan digital
Starter: Electric & kick
Lubrication system: Pressure circulation, trochoit oil pump
Cooling system: Liquid
Gearbox: 6-speed

Transmission type
final drive: Chain
Clutch: Wet multi-disc clutch, hydraulic

Physical measures
Dry weight: 109kg (240.3 pounds)
Overall height: 1120mm
Overall length: 2170mm
Overall width: 810mm (31.9 inches)
Ground clearance: 380mm (15.0 inches)
Wheelbase: 1490mm

Chassis and dimensions
Frame type: CrMo
Front suspension: WP MXMA 4860-Husaberg Enduro
Front suspension travel: 295mm
Rear suspension: WP PDS 5018Husaberg Enduro
Rear suspension travel: 320mm
Front tyre dimensions: 90/90-21
Rear tyre dimensions: 130/80-18
Front brakes: Single disc
Front brakes diameter: 260mm
Rear brakes: Single disc
Rear brakes diameter: 220mm
Speed and acceleration
Other specifications
Fuel capacity: 9 litres (2.38 gallons)

Husaberg FE 450

No comments:

Post a Comment